Versatility, reliability and expandability are the three main features that make the N-1000 the most popular access control panel ever.

Another key feature of the N-1000 is its completely distributed database. All card information, time zone information, relay control information and alarm point information is loaded into the N-1000’s memory. The unit can operate completely stand alone without dependence on any other equipment.

The most important feature of any access control system is the ability to be expanded. The N-1000 will operate as a stand alone two or four door controller, and as needs increase, up to 31 N-1000's may be connected on an RS485 drop-line.

Using WIN-PAKTM access control software, a total system is achieved by having each drop-line connected to a communication port, modem or ethernet terminal server.

N-1000 is designed to operate off-line, making access control decisions independently from a PC or other controlling device. It can also be connected to a host computer for system configuration, alarm monitoring and direct control. Connectivity to the host computer is accomplished via direct serial communication (RS232 or RS485), dial-up modem or TCP/IP network connection.

The N-1000-IV-X allows for a card database of 25,000 cards and a transaction buffer capable of storing 6,600 transactions.

Features:

• Four reader control panel (N-1000-IV)
• Supports all major reader technologies and 16-digit ABA card formats
• Distributed database for independent operation
• Operates in remote site configurations with dial-up (requires M-56K and N-485-HUB-2) or leased lines
• N-1000-IV-X: 25,000 card memory N-1000-IV: 5,000 card memory
• N-1000-IV-X: 6,600 buffers N-1000-IV: 10,200 buffers
• RS485 and 20 mA legacy communications are jumper selectable
• Compatible with the N-1000-III
• 16 supervised alarm inputs. Separate inputs for tamper switch and primary power fail monitoring
• DPDT Form C relays; four on N-1000-IV, eight on N-1000-IV-X
• 63 time zones to control card access, relays and alarm points
• Relays are “time-programmable” for automatic control
• 12 VDC battery backup
• 12 VDC, 500 mA output for reader/IR devices
• Eight programmable card formats supported
• Preassembled, hinged, locking enclosure with battery and toggle switch
• UL294 listing/CE certification